Finish First, 16 oz. can

Finish First

Finish First is the most technologically advanced auto polish on the market today. Based upon a recently developed high-tech polymer, Finish First works by laying down a tough polymer film onto the surface of automotive paint, which confers a deep, rich gloss on the automobile and protects the paint from air and water-borne contaminants. The polish is able to build up layers of this durable and weather-resistant film to increase protection and enrich the depth of gloss.

When Finish First is rubbed onto the car, three important things happen. First, the cleansing agent in Finish First begin immediately to dissolve old wax, tar, road film, dirt, and organic contaminants which cling to the paint even after washing. Second, microscopic polishing agents loosen and lift dirt or oxidized paint, and remove surface imperfections. Third, and most important, the precursors of the polymers migrate to the freshly cleaned and exposed surface and chemically bond themselves to the paint. This coating then cures into a tough, clear, protective, mirror-like solid. This special, clear film is able to refract and reflect light, which gives the car an exceptionally deep, rich, glossy appearance.

Finish First Can Be Used On

  • Painted surfaces (foreign and domestic), acrylics, enamels, metallics, clear coats, aluminum, chrome, steel, brass, fiberglass, glass, plastics and other hard impermeable surfaces.
  • Automobiles: Leaves a mirror-like shine that resists acid rain and other pollutants.
  • Boats: Reduces surface friction and resists gasoline, salt water and chemical spills.
  • Aircraft: Reduces drag for improved performance and fuel economy.
  • Recreational Vehicles, trucks, buses, motorcycles, and more.
  • Household Uses: Windows, kitchen counters, appliances, bathroom surfaces and mirrors, fixtures and more!

Application Instructions:
Wash and dry vehicle thoroughly. Try to avoid washing with household detergents which contain Alkali or Ammonia because they can harm the surface, leaving it dull and streaked. Automotive cleaning products remove dirt and grime build-up without harming your vehicle's painted surface.

Shake Well Before Using:
Apply approximately four drops the size of a dime to a clean, soft, cotton cloth. This amount will polish about a 2-square foot area. Remember, the polish applied should be used sparingly. Apply a thin film to your vehicle and allow to dry completely before buffing. After haze appears, allow to dry for a minimum of 15 minutes to 2 hours to give the Finish First layers time to cure. This drying time is an important part of the Finish First shine. With being a synthetic polish/finish the drying time allows the product to fill scratches and swirled marks.

  • A 1-pint can of Finish First will yield 8 to 10 coats on a mid-size car, or one coat on five separate cars.
  • The surface must be cool to the touch before applying. For best results, do not use in direct sunlight.
  • Do not apply Finish First to porous surfaces such as vinyl, rubber, fabric, etc.